Datasheet

315
XMEGA D4 [DATASHEET]
8135P–AVR–01/2014
35.5 8135L – 08/2012
35.6 8135K – 06/2012
35.7 8135J – 12/10
35.8 8135I – 10/10
35.9 8135H – 09/10
35.10 8135G – 08/10
1. Editing updates.
2. Updated all tables in the “Electrical Characteristics” on page 63.
3. Added new “Typical Characteristics” on page 143.
4. Added new Errata “Rev. E” on page 304.
5. Added new ERRATA on “Rev. A/B” on page 306: Non available functions and options
1. ATxmega64D4-CU is added in “Ordering information” on page 2
1. Datasheet status changed to complete: Preliminary removed from the front page.
2. Updated all tables in the “Electrical Characteristics” on page 63.
3. Replaced Table 31-11 on page 64.
4. Replaced Table 31-17 on page 65 and added the figure ”TOSC input capacitance” on page 66.
5. Updated ERRATA ADC (ADC has increased INL for some operating conditions).
6. Updated ERRATA ”rev. A/B” on page 90 with TWIE (TWIE is not available).
7. Updated the last page with Atmel new Brand Style Guide.
1. Updated Table 31-1 on page 58.
1. Updated ”Errata” on page 90.
1. Updated the Footnote 3 of ”Ordering Information” on page 2.
2. All references to CRC removed. Updated Figure 3-1 on page 7.
3. Updated ”Features” on page 26. Event Channel 0 output on port pin 7.
4. Updated ”DC Characteristics” on page 58 by adding Icc for Flash/EEPROM Programming.