Datasheet

161
XMEGA D3 [DATASHEET]
Atmel-8134N-ATxmega32D3-64D3-128D3-192D3-256D3-384D3_datasheet–03/2014
Table 32-150. Current consumption for modules and peripherals.
Note: 1. All parameters measured as the difference in current consumption between module enabled and disabled. All data at V
CC
= 3.0V, Clk
SYS
= 1MHz external clock
without prescaling, T = 25°C unless other conditions are given.
Symbol Parameter Condition
(1)
Min. Typ. Max. Units
I
CC
ULP oscillator 0.93
µA
32.768kHz int. oscillator 27
2MHz int. oscillator
85
DFLL enabled with 32.768kHz int. osc. as reference 115
32MHz int. oscillator
240
DFLL enabled with 32.768kHz int. osc. as reference 430
PLL 20× multiplication factor, 32MHz int. osc. DIV4 as reference 300
Watchdog timer 1
BOD
Continuous mode 140
Sampled mode, includes ULP oscillator 1.3
Internal 1.0V reference 220
Temperature sensor 215
ADC
16ksps, V
REF
= Ext. ref.
1.12
mA
CURRLIMIT = LOW 1.01
CURRLIMIT = MEDIUM 0.9
CURRLIMIT = HIGH 0.8
75ksps, V
REF
= Ext. ref. CURRLIMIT = LOW 1.7
300ksps, V
REF
= Ext. ref. 3.1
USART Rx and Tx enabled, 9600 BAUD 9.5 µA
Flash memory and EEPROM programming 4 mA