Datasheet

104
XMEGA D3 [DATASHEET]
Atmel-8134N-ATxmega32D3-64D3-128D3-192D3-256D3-384D3_datasheet–03/2014
Table 32-63. Current consumption for modules and peripherals.
Note: 1. All parameters measured as the difference in current consumption between module enabled and disabled. All data at V
CC
= 3.0V, Clk
SYS
= 1MHz external clock
without prescaling, T = 25°C unless other conditions are given.
Symbol Parameter Condition
(1)
Min. Typ. Max. Units
I
CC
ULP oscillator 0.9
µA
32.768kHz int. oscillator 26
2MHz int. oscillator
79
DFLL enabled with 32.768kHz int. osc. as reference 110
32MHz int. oscillator
245
DFLL enabled with 32.768kHz int. osc. as reference 415
PLL
20× multiplication factor,
32MHz int. osc. DIV4 as reference
305
Watchdog timer 1.0
BOD
Continuous mode 138
Sampled mode, includes ULP oscillator 1.4
Internal 1.0V reference 185
Temperature sensor 173
ADC
16ksps
V
REF
= Ext. ref.
1.3
mA
CURRLIMIT = LOW 1.15
CURRLIMIT = MEDIUM 1.0
CURRLIMIT = HIGH 0.9
75ksps
V
REF
= Ext. ref.
CURRLIMIT = LOW 1.7
300ksps
V
REF
= Ext. ref.
3.1
USART Rx and Tx enabled, 9600 BAUD 7.5 µA
Flash memory and EEPROM programming 4 mA