Datasheet

63
XMEGA C3 [DATASHEET]
8492F–AVR–07/2013
33. Electrical Characteristics
All typical values are measured at T = 25C unless other temperature condition is given. All minimum and maximum
values are valid across operating temperature and voltage unless other conditions are given.
Note: For devices that are not available yet, preliminary values in this datasheet are based on simulations, and/or
characterization of similar AVR XMEGA microcontrollers. After the device is characterized the final values will be
available, hence existing values can change. Missing minimum and maximum values will be available after the
device is characterized.
33.1 ATxmega32C3
33.1.1 Absolute Maximum Ratings
Stresses beyond those listed in Table 33-1 under may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or other conditions beyond those indicated in the operational sections
of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Table 33-1. Absolute maximum ratings.
33.1.2 General Operating Ratings
The device must operate within the ratings listed in Table 33-2 in order for all other electrical characteristics and typical
characteristics of the device to be valid.
Table 33-2. General operating conditions.
Symbol Parameter Condition Min. Typ. Max. Units
V
CC
Power supply voltage -0.3 4 V
I
VCC
Current into a V
CC
pin 200
mA
I
GND
Current out of a Gnd pin 200
V
PIN
Pin voltage with respect to Gnd
and V
CC
-0.5 V
CC
+0.5 V
I
PIN
I/O pin sink/source current -25 25 mA
T
A
Storage temperature -65 150
°C
T
j
Junction temperature 150
Symbol Parameter Condition Min. Typ. Max. Units
V
CC
Power supply voltage 1.60 3.6
V
AV
CC
Analog supply voltage 1.60 3.6
T
A
Temperature range -40 85
°C
T
j
Junction temperature -40 105