Datasheet

59
XMEGA D3 [DATASHEET]
Atmel-8134N-ATxmega32D3-64D3-128D3-192D3-256D3-384D3_datasheet–03/2014
PUSH Rr Push Register on Stack STACK  Rr None 1
(1)
POP Rd Pop Register from Stack Rd  STACK None 2
(1)
Bit and bit-test instructions
LSL Rd Logical Shift Left Rd(n+1)
Rd(0)
C



Rd(n),
0,
Rd(7)
Z,C,N,V,H 1
LSR Rd Logical Shift Right Rd(n)
Rd(7)
C



Rd(n+1),
0,
Rd(0)
Z,C,N,V 1
ROL Rd Rotate Left Through Carry Rd(0)
Rd(n+1)
C



C,
Rd(n),
Rd(7)
Z,C,N,V,H 1
ROR Rd Rotate Right Through Carry Rd(7)
Rd(n)
C



C,
Rd(n+1),
Rd(0)
Z,C,N,V 1
ASR Rd Arithmetic Shift Right Rd(n)  Rd(n+1), n=0..6 Z,C,N,V 1
SWAP Rd Swap Nibbles Rd(3..0)  Rd(7..4) None 1
BSET s Flag Set SREG(s)  1 SREG(s) 1
BCLR s Flag Clear SREG(s)  0 SREG(s) 1
SBI A, b Set Bit in I/O Register I/O(A, b)  1 None 1
CBI A, b Clear Bit in I/O Register I/O(A, b)  0 None 1
BST Rr, b Bit Store from Register to T T  Rr(b) T 1
BLD Rd, b Bit load from T to Register Rd(b)  T None 1
SEC Set Carry C  1 C 1
CLC Clear Carry C  0 C 1
SEN Set Negative Flag N  1 N 1
CLN Clear Negative Flag N  0 N 1
SEZ Set Zero Flag Z  1 Z 1
CLZ Clear Zero Flag Z  0 Z 1
SEI Global Interrupt Enable I  1 I 1
CLI Global Interrupt Disable I  0 I 1
SES Set Signed Test Flag S  1 S 1
CLS Clear Signed Test Flag S  0 S 1
SEV Set Two’s Complement Overflow V  1 V 1
CLV Clear Two’s Complement Overflow V  0 V 1
SET Set T in SREG T  1 T 1
CLT Clear T in SREG T  0 T 1
SEH Set Half Carry Flag in SREG H  1 H 1
CLH Clear Half Carry Flag in SREG H  0 H 1
MCU control instructions
BREAK Break (See specific descr. for BREAK) None 1
Mnemonics Operands Description Operation Flags #Clocks