Datasheet

102
8116J–AVR–06/2013
XMEGA A3B
Not recommended for new designs -
Use ATxmega256A3BU
37.5 8116F - 09/09
37.6 8116E - 06/09
37.7 8116D - 04/09
37.8 8116C - 02/09
6. Updated ”Alternate Pin Functions” on page 52.
7. Updated ”Operating voltage and frequency” on page 66 by replacing SYS to CPU.
8. Replaced Table 34-3 on page 67.
9. Updated Table 34-3 on page 67, Endurance and Data Retention.
11. Updated ”PAD Characteristics” on page 70. Input hysteresis is in V and not in mV.
12. Added new table ”Maximum load capacitance (CL) and ESR recommendation for 32.768 kHz
Crystal” on page 72.
13. Added new table ”Device wake-up time from sleep” on page 72.
14. Updated Table 34-20 on page 73.
15. Changed Internal Oscillator Speed to ”Oscillators and Wake-up Time” on page 90.
16. Added characterization for PDI speed in Figure 35-42 on page 94.
17. Updated ”Errata” on page 95.
1. Updated ”DC Characteristics” on page 64.
2. Added ”Flash and EEPROM Memory Characteristics” on page 67.
3. Added ”” on page 72.
4. Upddated ”Errata” on page 95.
1. Updated ”Electrical Characteristics” on page 64.
2. Added ”Typical Characteristics” on page 74.
3. Updated ”Errata” on page 95.
1. Updated ”Ordering Information” on page 2.
2. Editorial updates.
1. Added ”Errata” on page 95 for ATxmega256A3B rev B.