Datasheet

101
8116J–AVR–06/2013
XMEGA A3B
Not recommended for new designs -
Use ATxmega256A3BU
37. Datasheet Revision History
Please note that the referring page numbers in this section are referred to this document. The
referring revision in this section are referring to the document revision.
37.1 8116J - 06/13
37.2 8116I - 09/10
37.3 8116H - 08/10
37.4 8116G - 05/10
1. Not recommended for new designs - Use ATxmega256A3BU
1. Updated ”Errata” on page 95.
1. Updated Footnote 2 of Figure 2-1 on page 3.
2. Updated ”Features” on page 28. Event Channel 0 output on port pin 7.
3. Updated ”Timer/Counter and AWEX functions” on page 50.
4. Updated ”Alternate Pin Functions” on page 52.
5. Updated Table 30-3 on page 52. Pin 15 is VCC.
6. Updated ”DC Characteristics” on page 64 by adding Icc for Flash/EEPROM Programming.
7. Added AVCC in ”ADC Characteristics” on page 68.
8. Updated Start up time in ”ADC Characteristics” on page 68.
9. Updated ”DAC Characteristics” on page 69. Removed DC output impedence.
10 Updated ”VBAT and Battery Backup Characteristics” on page 73.
11. Updated Figure 35-6 on page 76. Replaced the figure by a correct one.
12. Fixed typo in “Errata” section.
13. Editorial updates.
1. Updated the device pin-out Figure 2-1 on page 3. PDI_CLK and PDI_DATA renamed only PDI.
2. Deleted page with duplicated information on Production Signature Row in ”Production Signature
Row” on page 12.
3. Changed value for Crystal Oscillator from 32 kHz to 32.768 kHz in ”Clock Options” on page 18.
4. Updated ”DAC - 12-bit Digital to Analog Converter” on page 44. DAC uses internal 1.0 voltage.
5. Updated ”Timer/Counter and AWEX functions” on page 50.