Datasheet

125
8068U–AVR–06/2013
XMEGA A3
Not recommended for new designs -
Use XMEGA A3U series
37.5 8068Q – 02/10
37.6 8068P – 02/10
37.7 8068O – 11/09
37.8 8068N – 10/09
8. Updated ”DAC Characteristics” on page 68. Removed DC output impedence.
9. Updated Figure 35-6 on page 74. Replaced the figure by a correct one.
10. Fixed typo in “Errata” section.
1. Added ”PDI Speed” on page 92.
1. Updated the device pin-out Figure 2-1 on page 3. PDI_CLK and PDI_DATA renamed only PDI.
2. Removed JTAG Reset from the datasheet.
3. Updated ”DAC - 12-bit Digital to Analog Converter” on page 43. DAC uses internal 1.0 voltage.
4. Added Table 34-19 on page 71.
5. Updated ”Timer/Counter and AWEX functions” on page 49.
6. Updated ”Alternate Pin Function Description” on page 49.
7. Updated all ”Electrical Characteristics” on page 63.
8. Updated ”PAD Characteristics” on page 69.
9. Changed Internal Oscillator Speed to ”Oscillators and Wake-up Time” on page 88.
10. Updated ”Errata” on page 93
1. Updated Table 34-3 on page 66, Endurance and Data Retention.
2. Updated Table 34-11 on page 69, Input hysteresis is in V and not in mV.
3. Updated ”Errata” on page 93.
1. Updated ”Errata” on page 93.