Datasheet

63
XMEGA D3 [DATASHEET]
Atmel-8134N-ATxmega32D3-64D3-128D3-192D3-256D3-384D3_datasheet–03/2014
32. Electrical characteristics
All typical values are measured at T = 25C unless other temperature condition is given. All minimum and maximum
values are valid across operating temperature and voltage unless other conditions are given.
32.1 Atmel ATxmega32D3
32.1.1 Absolute maximum ratings
Stresses beyond those listed in Table 32-30 on page 82 under may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these or other conditions beyond those indicated in the
operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
Table 32-1. Absolute maximum ratings.
32.1.2 General operating ratings
The device must operate within the ratings listed in Table 32-31 on page 82 in order for all other electrical characteristics
and typical characteristics of the device to be valid.
Table 32-2. General operating conditions.
Symbol Parameter Condition Min. Typ. Max. Units
V
CC
Power supply voltage -0.3 4 V
I
VCC
Current into a V
CC
pin 200
mA
I
GND
Current out of a Gnd pin 200
V
PIN
Pin voltage with respect to Gnd and V
CC
-0.5 V
CC
+ 0.5 V
I
PIN
I/O pin sink/source current -25 25 mA
T
A
Storage temperature -65 150
°C
T
j
Junction temperature 150
Symbol Parameter Condition Min. Typ. Max. Units
V
CC
Power supply voltage 1.60 3.6
V
AV
CC
Analog supply voltage 1.60 3.6
T
A
Temperature range -40 85
°C
T
j
Junction temperature -40 105