Datasheet

75XMEGA E5 [DATASHEET]
Atmel-8153H–AVR-ATxmega8E5-ATxmega16E5-ATxmega32E5_Datasheet–07/2014
Notes: 1. All Power Reduction Registers set.
Table 36-4. Current consumption for modules and peripherals.
Note: 1. All parameters measured as the difference in current consumption between module enabled and disabled. All data at VCC = 3.0V, Clk
SYS
= 1MHz external clock
without prescaling, T = 25°C unless other conditions are given.
Symbol Parameter Condition
(1)
Min. Typ. Max. Units
I
CC
Internal ULP oscillator 100 nA
32.768kHz int. oscillator 27 µA
8MHz int. oscillator
Normal power mode 65
µA
Low power mode 45
32MHz int. oscillator
275
µA
DFLL enabled with 32.768kHz int. osc. as reference 400
PLL
20x multiplication factor,
32MHz int. osc. DIV4 as reference
230 µA
Watchdog timer 0.3 µA
BOD
Continuous mode 245
µA
Sampled mode 0.4
Internal 1.0V reference 200 µA
Internal temperature sensor 100 µA
ADC
16ksps
V
REF
= Ext ref
1.5
mA
CURRLIMIT = LOW 1.4
CURRLIMIT = MEDIUM 1.3
CURRLIMIT = HIGH 1.2
75ksps, V
REF
= Ext ref CURRLIMIT = LOW 1.7
300ksps, V
REF
= Ext ref 3.1
DAC
250ksps
V
REF
= Ext ref
No load
Normal mode 1.9
mA
Low Power mode 1.1
AC 200 µA
EDMA 200 µA
Timer/counter 25 µA
USART Rx and Tx enabled, 9600 BAUD 8 µA
XCL 16-bit timer/counter 6 µA
Flash memory and EEPROM programming 4 mA