Datasheet

142
XMEGA D3 [DATASHEET]
Atmel-8134N-ATxmega32D3-64D3-128D3-192D3-256D3-384D3_datasheet–03/2014
Table 32-121. Current consumption for modules and peripherals.
Note: 1. All parameters measured as the difference in current consumption between module enabled and disabled. All data at V
CC
= 3.0V, Clk
SYS
= 1MHz external clock
without prescaling, T = 25°C unless other conditions are given.
Symbol Parameter Condition
(1)
Min. Typ. Max. Units
I
CC
ULP oscillator 0.9
µA
32.768kHz int. oscillator 25
2MHz int. oscillator
78
DFLL enabled with 32.768kHz int. osc. as reference 110
32MHz int. oscillator
250
DFLL enabled with 32.768kHz int. osc. as reference 440
PLL
20× multiplication factor,
32MHz int. osc. DIV4 as reference
310
Watchdog timer 1.0
BOD
Continuous mode 132
Sampled mode, includes ULP oscillator 1.4
Internal 1.0V reference 185
Temperature sensor 182
ADC
16ksps
V
REF
= Ext. ref.
1.12
mA
CURRLIMIT = LOW 1.01
CURRLIMIT = MEDIUM 0.9
CURRLIMIT = HIGH 0.8
75ksps
V
REF
= Ext. ref.
CURRLIMIT = LOW 1.7
300ksps
V
REF
= Ext. ref.
3.1
USART Rx and Tx enabled, 9600 BAUD 9.5 µA
Flash memory and EEPROM programming 10 mA