Datasheet

52
XMEGA D3 [DATASHEET]
Atmel-8134N-ATxmega32D3-64D3-128D3-192D3-256D3-384D3_datasheet–03/2014
Notes: 1. Pin mapping of all TC0 can optionally be moved to high nibble of port.
2. If TC0 is configured as TC2 all eight pins can be used for PWM output.
3. Pin mapping of all USART0 can optionally be moved to high nibble of port.
4. Pins MOSI and SCK for all SPI can optionally be swapped.
5. CLKOUT can optionally be moved between port C, D, and E and between pin 4 and 7.
6. EVOUT can optionally be moved between port C, D, and E and between pin 4 and 7.
Table 28-4. Port D - Alternate functions.
Table 28-5. Port E - Alternate functions.
PC6 22 SYNC OC0DLS MISO RTCOUT
PC7 23 SYNC OC0DHS SCK clk
PER
EVOUT
GND 24
VCC 25
PORT C PIN # INTERRUPT TCC0
(1)(2)
AWEXC TCC1 USARTC0
(3)
SPIC
(4)
TWIC CLOCKOUT
(5)
EVENTOUT
(6)
PORT D PIN # INTERRUPT TCD0 USARTD0 SPID CLOCKOUT EVENTOUT
PD0 26 SYNC OC0A
PD1 27 SYNC OC0B XCK0
PD2 28 SYNC/ASYNC OC0C RXD0
PD3 29 SYNC OC0D TXD0
PD4 30 SYNC SS
PD5 31 SYNC MOSI
PD6 32 SYNC MISO
PD7 33 SYNC SCK Clk
PER
EVOUT
GND 34
VCC 35
PORT E PIN # INTERRUPT TCE0 USARTE0 TOSC TWIE CLOCKOUT EVENTOUT
PE0 36 SYNC OC0A SDA
PE1 37 SYNC OC0B XCK0 SCL
PE2 38 SYNC/ASYNC OC0C RXD0
PE3 39 SYNC OC0D TXD0
PE4 40 SYNC
PE5 41 SYNC
PE6 42 SYNC TOSC2
PE7 43 SYNC TOSC1 Clk
PER
EVOUT
GND 44
VCC 45