Datasheet

332
XMEGA C3 [DATASHEET]
8492F–AVR–07/2013
35.5 ATxmega32C3
35.5.1 Rev I
 AC system status flags are only valid if AC-system is enabled
 Temperature sensor not calibrated
1. AC system status flags are only valid if AC-system is enabled
The status flags for the ac-output are updated even though the AC is not enabled which is invalid. Also, it is not
possible to clear the AC interrupt flags without enabling either of the Analog comparators.
Problem fix/Workaround
Software should clear the AC system flags once, after enabling the AC system before using the AC system status
flags.
2. Temperature sensor not calibrated
Temperature sensor factory calibration not implemented.
Problem fix/Workaround
None
35.5.2 Rev A - H
Not sampled.