Datasheet

135
XMEGA B3 [DATASHEET]
8074D–AVR–08/2013
39. Datasheet Revision History
Please note that the referring page numbers in this section are referred to this document. The referring revision in this
section are referring to the document revision.
39.1 8074D – 08/2013
39.2 8074C – 02/2013
39.3 8074B – 02/2012
39.4 8074A – 10/2011
1. 64-pad DRQFN package option added for ATxmega128B3:
 “Ordering Information” on page 2: New ordering codes for ATxmega128B3 added.
 “Pinout – DRQFN” on page 4: Pinout figure and table added.
 “Packaging information” : “64P2” on page 69 added.
1. Updated “Ordering Information” on page 2: Added -AUR option.
2. Updated “Packaging information” : Added package drawing for “64M2” on page 68
3. Updated Table 32-4 on page 58: PDI and RESET pins updated.
4. Updated “External clock with prescaler for system clock” Table 36-26 on page 85
5. Added ESR parameter to the “External 16MHz crystal oscillator and XOSC characteristics.”
Table 36-27 on page 85.
6. Updated “Errata” , “Rev. C” on page 132: “JTAG revision” replaced by “Device revision number”
7. Updated template.
1. Updated the Table 7-2 on page 16. The page size (words) for ATxmega128B3 changed from
256 to 128.
2. Updated all “Electrical Characteristics” on page 70.
3. Updated all “Typical Characteristics” on page 92.
4. Updated “Errata” on page 134.
1. Initial revision.