Datasheet

75
XMEGA B [DATASHEET]
8291B–AVR–01/2013
6.8.3 STROBE – Strobe register
If the STROBE register location is written, each event channel will be set according to the STROBE[n] and corresponding
DATA[n] bit settings, if any are unequal to zero.
A single event lasting for one peripheral clock cycle will be generated.
6.8.4 DATA – Data register
This register contains the data value when manually generating a data event. This register must be written before the
STROBE register. For details, See ”STROBE – Strobe register” on page 75.
011 4SAMPLES Four samples
100 5SAMPLES Five samples
101 6SAMPLES Six samples
110 7SAMPLES Seven samples
111 8SAMPLES Eight samples
Table 6-6. Digital filter coefficient values (Continued).
DIGFILT[2:0] Group Configuration Description
Bit 7 6 5 4 3 2 1 0
+0x10 STROBE[7:0]
Read/Write R/W R/W R/W R/W R/W R/W R/W R/W
Initial Value 0 0 0 0 0 0 0 0
Bit 76543210
+0x11 DATA[7:0]
Read/Write R/W R/W R/W R/W R/W R/W R/W R/W
Initial Value 00000000