Manualshelf

Datasheet

ManualsBrandsMICROCHIP TECHNOLOGY ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller CBGA 100 (9x9) 8/16-Bit 32 MHz I/O number 53
31323334353637383940
36
XMEGA B [DATASHEET]
8291B–AVR–01/2013
4.16 Register Description – Production Signature Row
4.16.1 RCOSC2M – Internal 2MHz Oscillator Calibration register
Bit 7:0 – RCOSC2M[7:0]: Internal 2MHz Oscillator Calibration Value
This byte contains the oscillator calibration value for the internal 2MHz oscillator. Calibration of the oscillator is performed
during production testing of the device. During reset, this value is automatically loaded into calibration register B for the
2MHz DFLL. Refer to “CALB – Calibration register B” on page 94 for more details.
4.16.2 RCOSC2MA – Internal 2MHz Oscillator Calibration register
Bit 7:0 – RCOSC2MA[7:0]: Internal 2MHz Oscillator Calibration Value
This byte contains the oscillator calibration value for the internal 2MHz oscillator. Calibration of the oscillator is performed
during production testing of the device. During reset, this value is automatically loaded into calibration register A for the
2MHz DFLL. Refer to “CALA – Calibration register A” on page 93 for more details.
4.16.3 RCOSC32K – Internal 32.768kHz Oscillator Calibration register
Bit 7:0 – RCOSC32K[7:0]: Internal 32.768kHz Oscillator Calibration Value
This byte contains the oscillator calibration value for the internal 32.768kHz oscillator. Calibration of the oscillator is
performed during production testing of the device. During reset, this value is automatically loaded into the calibration
register for the 32.768kHz oscillator. Refer to “RC32KCAL – 32kHz Oscillator Calibration register” on page 92 for more
details.
4.16.4 RCOSC32M – Internal 32MHz Oscillator Calibration register
Bit 7:0 – RCOSC32M[7:0]: Internal 32MHz Oscillator Calibration Value
This byte contains the oscillator calibration value for the internal 32MHz oscillator. Calibration of the oscillator is
performed during production testing of the device. During reset, this value is automatically loaded into calibration register
B for the 32MHz DFLL. Refer to “CALB – Calibration register B” on page 94 for more details.
Bit 7 6 5 4 3 2 1 0
+0x00 RCOSC2M[7:0]
Read/Write R R R R R R R R
Initial Value x x x x x x x x
Bit 7 6 5 4 3 2 1 0
+0x01 RCOSC2MA[7:0]
Read/Write R R R R R R R R
Initial Value x x x x x x x x
Bit 7 6 5 4 3 2 1 0
+0x02 RCOSC32K[7:0]
Read/Write R R R R R R R R
Initial Value x x x x x x x x
Bit 7 6 5 4 3 2 1 0
+0x03 RCOSC32M[7:0]
Read/Write R R R R R R R R
Initial Value x x x x x x x x