Datasheet

198
XMEGA B [DATASHEET]
8291B–AVR–01/2013
15.7.11 OUTOVEN – Output Override Enable register
Note: 1. Can be written only if the fault detect flag (FDF) is zero.
 Bit 7:0 – OUTOVEN[7:0]: Output Override Enable
These bits enable override of the corresponding port output register (i.e., one-to-one bit relation to pin position). The port
direction is not overridden.
15.8 Register Summary
Bit 76543210
+0x0C OUTOVEN[7:0]
Read/Write R/W
(1)
R/W
(1)
R/W
(1)
R/W
(1)
R/W
(1)
R/W
(1)
R/W
(1)
R/W
(1)
Initial Value 0 0 0 0 0 0 0 0
Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Pag
+0x00 CTRL – – PGM CWCM DTICDAE DTICCCE DTICCBEN DTICCAEN 194
+0x01 Reserved – – – – – – – –
+0x02 FDEMASK FDEVMASK[7:0] 194
+0x03 FDCTRL – – – FDDBD – FDMODE FDACT[1:0] 195
+0x04 STATUS – – – – – FDF DTBHSV DTBLSV 196
+0x05 Reserved – – – – – – – –
+0x06 DTBOTH DTBOTH[7:0] 196
+0x07 DTBOTHBUF DTBOTHBUF[7:0] 196
+0x08 DTLS DTLS[7:0] 197
+0x09 DTHS DTHS[7:0] 197
+0x0A DTLSBUF DTLSBUF[7:0] 197
+0x0B DTHSBUF DTHSBUF[7:0] 197
+0x0C OUTOVEN OUTOVEN[7:0] 198