Datasheet

135
XMEGA B1 [DATASHEET]
Atmel-8330F-AVR-ATxmega64B1-128B1_datasheet–02/2014
39. Datasheet Revision History
Please note that the referring page numbers in this section are referred to this document. The referring revision in this
section are referring to the document revision.
39.1 8330F – 02/2014
39.2 8330E – 06/2013
39.3 8330D – 01/2013
39.4 8330C – 07/2012
1.
Added the correct VFBGA package drawing:
 Replaced the package 100C1 (CBGA) by the package 7A1 (VFBGA)
 Updated the package type in “Ordering Information” on page 2
 Updated the title in Figure 2-2 on page 4 and in the Table 2-1 on page 4
 Updated the package type in “Typical Characteristics” on page 92
2. Updated the title name of the Table 36-24 on page 83
1. Added pinout for CBGA package option: Figure 2-2 and Table 2-1 on page 4.
1. Updated “Ordering Information” on page 2: Added -AUR, -CU and -CUR options.
2. Updated “Packaging information” : Added package drawing for “7A1” on page 69
3. Updated Table 32-5 on page 58: PDI and RESET pins updated.
4. Updated pin number for PR1 to pin 81 in Table 32-8 on page 61.
5. Updated “External clock with prescaler for system clock” Table 36-26 on page 85
6. Added ESR parameter to the “External 16MHz crystal oscillator and XOSC characteristics.”
Table 36-27 on page 85.
1. Updated the Table 32-4 on page 58. PDI_CLOCK is on pin 16 and PDI_DATA on pin 15.
2. Updated the datasheet using the Atmel new template.
3. Updated “Errata” , “Rev. C” on page 134: “JTAG revision” replaced by “Device revision number”.