Datasheet

894
32142D–06/2013
ATUC64/128/256L3/4U
1. 0x55 (sync)
2. 0xC1 (command)
3. 0x00 (length MSB)
4. 0x07 (length LSB)
5. 0xCA (Data MSB)
6. 0xFE
7. 0xBA
8. 0xBE (Data LSB)
9. 0x00 (Status byte)
10. 0x00 (Bytes remaining MSB)
11. 0x00 (Bytes remaining LSB)
12. 0xXX (CRC MSB)
13. 0xXX (CRC LSB)
The status is 0x00 and all data read are valid. An unsuccessful four byte read can look like this:
1. 0x55 (sync)
2. 0xC1 (command)
3. 0x00 (length MSB)
4. 0x07 (length LSB)
5. 0xCA (Data MSB)
6. 0xFE
7. 0xXX (An error has occurred. Data read is undefined. 5 bytes remaining of the Data
field)
8. 0xXX (More undefined data)
9. 0x02 (Status byte)
10. 0x00 (Bytes remaining MSB)
11. 0x05 (Bytes remaining LSB)
12. 0xXX (CRC MSB)
13. 0xXX (CRC LSB)
The error occurred after reading 2 bytes on the SAB. The rest of the bytes read are undefined.
The status byte indicates the error and the bytes remaining indicates how many bytes were
remaining to be sent of the data field of the packet when the error occurred.
Table 34-52. MEMDATA Status Byte
status byte Description
0x00 Read successful
0x01 SAB busy
0x02 Bus error (wrong address)
Other Reserved
Table 34-53. MEMDATA Details
Response Details
Response value 0xC1
Additional data Data read, status byte, and byte count (2 bytes)