Datasheet

767
32142D–06/2013
ATUC64/128/256L3/4U
30.9.12 AC Configuration Register
Name:
CONFn
Access Type: Read/Write
Offset: 0xD0,0xD4,0xD8,0xDC,0xE0,0xE4,0xE8,0xEC
Reset Value: 0x00000000
• FLEN: Filter Length
000: Filter off.
n: Number of samples to be averaged =2
n
.
• HYS: Hysteresis Value
0000: No hysteresis.
1111: Max hysteresis.
• EVENN: Event Enable Negative
0: Do not output event when ACOUT is zero.
1: Output event when ACOUT is zero.
• EVENP: Event Enable Positive
0: Do not output event when ACOUT is one.
1: Output event when ACOUT is one.
• INSELP: Positive Input Select
00: ACPn pin selected.
01: Reserved.
10: Reserved.
11: Reserved.
• INSELN: Negative Input Select
00: ACNn pin selected.
01: ACREFN pin selected.
10: Reserved.
11: Reserved.
•MODE: Mode
00: Off.
01: Continuous Measurement Mode.
10: User Triggered Single Measurement Mode.
11: Event Triggered Single Measurement Mode.
31 30 29 28 27 26 25
24
-FLEN HYS
23 22 21 20 19 18 17
16
- - - - - - EVENP EVENN
15 14 13 12 11 10 9
8
- - - - INSELP INSELN
7654321
0
-- MODE -- IS