Datasheet

766
32142D–06/2013
ATUC64/128/256L3/4U
30.9.11 Window Configuration Register
Name:
CONFWn
Access Type: Read/Write
Offset: 0x80,0x84,0x88,0x8C
Reset Value: 0x00000000
• WFEN: Window Mode Enable
0: The window mode is disabled.
1: The window mode is enabled.
• WEVEN: Window Event Enable
0: Event from awout is disabled.
1: Event from awout is enabled.
• WEVSRC: Event Source Selection for Window Mode
000: Event on acwout rising edge.
001: Event on acwout falling edge.
010: Event on awout rising or falling edge.
011: Inside window.
100: Outside window.
101: Measure done.
110-111: Reserved.
• WIS: Window Mode Interrupt Settings
00: Window interrupt as soon as the input voltage is inside the window.
01: Window interrupt as soon as the input voltage is outside the window.
10: Window interrupt on toggle of window compare output.
11: Window interrupt when evaluation of input voltage is done.
31 30 29 28 27 26 25
24
--------
23 22 21 20 19 18 17
16
-------WFEN
15 14 13 12 11 10 9
8
- - - - WEVEN WEVSRC
7654321
0
------ WIS