Datasheet

727

32142D–06/2013

ATUC64/128/256L3/4U

29.9.1 Control Register

Access Type: Write-only

Offset: 0x00

Reset Value: 0x00000000

• DIS: ADCDIFB Disable

Writing a zero to this bit has no effect.

Writing a one to this bit disables the ADCIFB.

Note: Disabling the ADCIFB effectively stops all clocks in the module so the user must make sure the ADCIFB is idle before

disabling the ADCIFB.

• EN: ADCIFB Enable

Writing a zero to this bit has no effect.

Writing a one to this bit enables the ADCIFB.

Note: The ADCIFB must be enabled before use.

• START: Start Conversion

Writing a zero to this bit has no effect.

Writing a one to this bit starts an Analog-to-Digital conversion.

• SWRST: Software Reset

Writing a zero to this bit has no effect.

Writing a one to this bit resets the ADCIFB, simulating a hardware reset.

31 30 29 28 27 26 25 24

--------

23 22 21 20 19 18 17 16

--------

15 14 13 12 11 10 9 8

------DISEN

76543210

------STARTSWRST