Datasheet

726
32142D–06/2013
ATUC64/128/256L3/4U
29.9 User Interface
Note: 1. The reset values for these registers are device specific. Please refer to the Module Configuration section at the end of this
chapter.
Table 29-3. ADCIFB Register Memory Map
Offset Register Name Access Reset
0x00 Control Register CR Write-only -
0x04 Mode Register MR Read/Write 0x00000000
0x08 ADC Configuration Register ACR Read/Write 0x00000000
0x0C Trigger Register TRGR Read/Write 0x00000000
0x10 Compare Value Register CVR Read/Write 0x00000000
0x14 Status Register SR Read-only 0x00000000
0x18 Interrupt Status Register ISR Read-only 0x00000000
0x1C Interrupt Clear Register ICR Write-only -
0x20 Interrupt Enable Register IER Write-only -
0x24 Interrupt Disable Register IDR Write-only -
0x28 Interrupt Mask Register IMR Read-only 0x00000000
0x2C Last Converted Data Register LCDR Read-only 0x00000000
0x30 Parameter Register PARAMETER Read-only -
(1)
0x34 Version Register VERSION Read-only -
(1)
0x40 Channel Enable Register CHER Write-only -
0x44 Channel Disable Register CHDR Write-only -
0x48 Channel Status Register CHSR Read-only 0x00000000