Datasheet

600
32142D–06/2013
ATUC64/128/256L3/4U
24.8 User Interface
Note: 1. The reset values for these registers are device specific. Please refer to the Module Configuration section at the end of this
chapter.
Table 24-3. IISC Register Memory Map
Offset Register Register Name Access Reset
0x00 Control Register CR Write-only 0x00000000
0x04 Mode Register MR Read/Write 0x00000000
0x08 Status Register SR Read-only 0x00000000
0x0C Status Clear Register SCR Write-only 0x00000000
0x10 Status Set Register SSR Write-only 0x00000000
0x14 Interrupt Enable Register IER Write-only 0x00000000
0x18 Interrupt Disable Register IDR Write-only 0x00000000
0x1C Interrupt Mask Register IMR Read-only 0x00000000
0x20 Receiver Holding Register RHR Read-only 0x00000000
0x24 Transmitter Holding Register THR Write-only 0x00000000
0x28 Version Register VERSION Read-only -
(1)
0x2C Parameter Register PA RA ME TE R Read-only -
(1)