Datasheet

459
32142D–06/2013
ATUC64/128/256L3/4U
20.6.8.1 Master Node Configuration
The Peripheral DMA Controller Mode bit (LINMR.PDCM) allows the user to select configuration:
• PDCM=0: LIN configuration must be written to LINMR, it is not stored in the write buffer.
• PDCM=1: LIN configuration is written by the DMA Controller to THR, and is stored in the
write buffer. Since data transfer size is a byte, the transfer is split into two accesses. The first
writes the NACT, PARDIS, CHKDIS, CHKTYP, DLM and FSDIS bits, while the second writes
the DLC field. If NACT=PUBLISH, the write buffer will also contain the Identifier.
When NACT=SUBSCRIBE, the read buffer contains the data.
Figure 20-33. Master Node with Peripheral DMA Controller (PDCM=0)
Figure 20-34. Master Node with Peripheral DMA Controller (PDCM=1)
|
|
|
|
RXRDY
TXRDY
Peripheral
bus
USART LIN
CONTROLLER
DATA 0
DATA N
|
|
|
|
READ BUFFER
NODE ACTION = PUBLISH NODE ACTION = SUBSCRIBE
Peripheral DMA
Controller
RXRDY
Peripheral
bus
DATA 0
DATA 1
DATA N
WRITE BUFFER
Peripheral DMA
Controller
USART LIN
CONTROLLER
|
|
|
|
|
|
|
|
NACT
PARDIS
CHKDIS
CHKTYP
DLM
FSDIS
DLC
IDENTIFIER
DATA 0
DATA N
WRITE BUFFER
RXRDY
Peripheral
bus
DLC
IDENTIFIER
DATA 0
DATA N
WRITE BUFFER
RXRDY
READ BUFFER
NODE ACTION = PUBLISH
NODE ACTION = SUBSCRIBE
Peripheral DMA
Controller
Peripheral DMA
Controller
USART LIN
CONTROLLER
NACT
PARDIS
CHKDIS
CHKTYP
DLM
FSDIS
USART LIN
CONTROLLER
TXRDY
Peripheral
bus