Datasheet

445
32142D–06/2013
ATUC64/128/256L3/4U
20.6.3.9 Framing Error
The receiver is capable of detecting framing errors. A framing error has occurred if a stop bit
reads as zero. This can occur if the transmitter and receiver are not synchronized. A framing
error is reported by CSR.FRAME as soon as the error is detected, at the middle of the stop bit.
Figure 20-13. Framing Error Status
20.6.3.10 Transmit Break
When TXRDY is set, the user can request the transmitter to generate a break condition on the
TXD line by writing a one to The Start Break bit (CR.STTBRK). The break is treated as a normal
0x00 character transmission, clearing TXRDY and TXEMPTY, but with zeroes for preambles,
start, parity, stop, and time guard bits. Writing a one to the Stop Break bit (CR.STBRK) will stop
the generation of new break characters, and send ones for TG duration or at least 12 bit periods,
ensuring that the receiver detects end of break, before resuming normal operation. Figure 20-14
illustrates STTBRK and STPBRK effect on the TXD line.
Writing to STTBRK and STPBRK simultaneously can lead to unpredictable results. Writes to
THR before a pending break has started will be ignored.
9 600 104 6 827
14400 69 4 551
19200 52 3 413
28800 35 2 276
33400 30 1 962
56000 18 1 170
57600 17 1 138
200000 5 328
Baud Rate (bit/sec) Bit Time (µs) Time-out (ms)
D0 D1 D2 D3 D4 D5 D6 D7
RXD
Start
Bit
Parity
Bit
Stop
Bit
Baud Rate
Clock
Write
CR
FRAME
RXRDY
RSTSTA = 1