Datasheet

438
32142D–06/2013
ATUC64/128/256L3/4U
The baud rate is calculated with the following formula (OVER=0):
The baud rate error is calculated with the following formula. It is not recommended to work with
an error higher than 5%.
20.6.1.3 Fractional Baud Rate in Asynchronous Mode
The baud rate generator has a limitation: the source frequency is always a multiple of the baud
rate. An approach to this problem is to integrate a high resolution fractional N clock generator,
outputting fractional multiples of the reference source clock. This fractional part is selected with
the Fractional Part field (BRGR.FP), and is activated by giving it a non-zero value. The resolu-
tion is one eighth of CD. The resulting baud rate is calculated using the following formula:
The modified architecture is presented below:
Table 20-3. Baud Rate Example (OVER=0)
Source Clock (Hz)
Expected Baud
Rate (bit/s) Calculation Result CD Actual Baud Rate (bit/s) Error
3 686 400 38 400 6.00 6 38 400.00 0.00%
4 915 200 38 400 8.00 8 38 400.00 0.00%
5 000 000 38 400 8.14 8 39 062.50 1.70%
7 372 800 38 400 12.00 12 38 400.00 0.00%
8 000 000 38 400 13.02 13 38 461.54 0.16%
12 000 000 38 400 19.53 20 37 500.00 2.40%
12 288 000 38 400 20.00 20 38 400.00 0.00%
14 318 180 38 400 23.30 23 38 908.10 1.31%
14 745 600 38 400 24.00 24 38 400.00 0.00%
18 432 000 38 400 30.00 30 38 400.00 0.00%
24 000 000 38 400 39.06 39 38 461.54 0.16%
24 576 000 38 400 40.00 40 38 400.00 0.00%
25 000 000 38 400 40.69 40 38 109.76 0.76%
32 000 000 38 400 52.08 52 38 461.54 0.16%
32 768 000 38 400 53.33 53 38 641.51 0.63%
33 000 000 38 400 53.71 54 38 194.44 0.54%
40 000 000 38 400 65.10 65 38 461.54 0.16%
50 000 000 38 400 81.38 81 38 580.25 0.47%
60 000 000 38 400 97.66 98 38 265.31 0.35%
BaudRate CLKUSARTCD 16=
Error 1
ExpectedBaudRate
ActualBaudRate
-------------------------------------------------- -


–=
BaudRate
SelectedClock
82 OVER–CD
FP
8
-------+




--------------------------------------------------------------------=