Datasheet

431
32142D–06/2013
ATUC64/128/256L3/4U
19.7.21 Parameter Register
Name:
PARAMETER
Access Type: Read-only
Offset:0x1F8
Reset Value: -
• PARAMETER:
0: The corresponding pin is not implemented in this GPIO port.
1: The corresponding pin is implemented in this GPIO port.
There is one PARAMETER register per GPIO port. Each bit in the Parameter Register indicates whether the corresponding
GPER bit is implemented.
31 30 29 28 27 26 25 24
PAR A ME TE R
23 22 21 20 19 18 17 16
PAR A ME TE R
15 14 13 12 11 10 9 8
PAR A ME TE R
76543210
PAR A ME TE R