Datasheet

13
32142D–06/2013
ATUC64/128/256L3/4U
3.2.2 Peripheral Functions
Each GPIO line can be assigned to one of several peripheral functions. The following table
describes how the various peripheral functions are selected. The last listed function has priority
in case multiple functions are enabled on the same pin.
3.2.3 JTAG Port Connections
If the JTAG is enabled, the JTAG will take control over a number of pins, irrespectively of the I/O
Controller configuration.
3.2.4 Nexus OCD AUX Port Connections
If the OCD trace system is enabled, the trace system will take control over a number of pins, irre-
spectively of the I/O Controller configuration. Two different OCD trace pin mappings are
possible, depending on the configuration of the OCD AXS register. For details, see the AVR32
UC Technical Reference Manual.
Table 3-2. Peripheral Functions
Function Description
GPIO Controller Function multiplexing GPIO and GPIO peripheral selection A to H
Nexus OCD AUX port connections OCD trace system
aWire DATAOUT aWire output in two-pin mode
JTAG port connections JTAG debug port
Oscillators OSC0, OSC32
Table 3-3. JTAG Pinout
48-pin 64-pin Pin name JTAG pin
11 15 PA00 TCK
14 18 PA01 TMS
13 17 PA02 TDO
46PA03TDI
Table 3-4. Nexus OCD AUX Port Connections
Pin AXS=1 AXS=0
EVTI_N PA05 PB08
MDO[5] PA10 PB00
MDO[4] PA18 PB04
MDO[3] PA17 PB05
MDO[2] PA16 PB03
MDO[1] PA15 PB02
MDO[0] PA14 PB09