Datasheet

618
32133D–11/2011
UC3D
28.7.3 Status Register
Name :
SR
Access Type : Read-Only
Offset : 0x08
Reset Value : 0x00000000
•
CBUSY: Conversion busy
1: ADCIFD is converting
0: ADCIFD is not converting
• SBUSY: Sequencer busy
1: ADCIFD sequencer is running
0: ADCIFD sequencer is ready
• TBUSY: Timer busy
1: ADCIFD internal timer is running
0: ADCIFD internal timer is stopped
• EN: Enable Status
1: ADCIFD is ready for operation
0: ADCIFD is not ready
• CSCNV:Current Sequencer Conversion
This field is set to the sequencer current conversion identifier
• TTO: Timer time-out
This bit is set when the internal timer times out
This bit is cleared when the corresponding bit in SCR is written to one
• SUTD:Start-up time done
This bit is set when a start-up done event occurs
This bit is cleared when the corresponding bit in SCR is written to one
• SMTRG:Sequencer missed trigger event
This bit is set when a sequencer trigger event is missed
This bit is cleared when the corresponding bit in SCR is written to one
• WM:Window monitor
This bit is set when the watched result value goes to the defined window
31 30 29 28 27 26 25 24
----CBUSYSBUSYTBUSYEN
23 22 21 20 19 18 17 16
---- CSCNV
15 14 13 12 11 10 9 8
--------
76543210
TTO SUTD SMTRG WM LOVR SEOC SEOS SSOS