Datasheet

616
32133D–11/2011
UC3D
28.7.1 Control Register
Name :
CR
Access Type : Write-Only
Offset : 0x00
Reset Value : 0x00000000
Writing a zero to any of those bits in this register has no effect.
•
DIS:ADCIFD disable
Writing a one to this bit disables the ADCIFD
Reading this bit always returns 0
Note: Changes do not apply immediately, ADCIFD status can be checked by reading the EN field of the SR register
• EN:ADCIFD enable
Writing a one to this bit enables the ADCIFD
Reading this bit always returns 0
Note: Changes do not apply immediately, ADCIFD status can be checked by reading the EN field of the SR register
• TSTART:Internal timer start bit
Writing a one to this bit starts the internal timer
Reading this bit always returns 0
Note: The internal timer status can be read in the RUNT field of the SR register
• TSTOP:Internal timer stop bit
Writing a one to this bit stops the internal timer
Reading this bit always returns 0
Note: The internal timer status can be read in the RUNT field of the SR register
• STRIG:Sequencer trigger
Writing a one to this bit generates a sequencer trigger event
Reading this bit always returns 0
• SWRST: Software reset
Writing a zero to this bit has no effect.
Writing a one to this bit resets the ADCIFD, simulating a hardware reset. Using that control ensures that ADCIFD internal
features will return to their initial states. Configuration registers won’t be affected.
31 30 29 28 27 26 25 24
--------
23 22 21 20 19 18 17 16
--------
15 14 13 12 11 10 9 8
------DISEN
76543210
----TSTARTTSTOPSTRIGSWRST