Datasheet

547
32133D–11/2011
UC3D
26.7.1 Channel Control Register
Name:
CCR
Access Type: Write-only
Offset: 0x00 + n * 0x40
Reset Value: 0x00000000
• SWTRG: Software Trigger Command
1: Writing a one to this bit will perform a software trigger: the counter is reset and the clock is started.
0: Writing a zero to this bit has no effect.
• CLKDIS: Counter Clock Disable Command
1: Writing a one to this bit will disable the clock.
0: Writing a zero to this bit has no effect.
• CLKEN: Counter Clock Enable Command
1: Writing a one to this bit will enable the clock if CLKDIS is not one.
0: Writing a zero to this bit has no effect.
31 30 29 28 27 26 25 24
--------
23 22 21 20 19 18 17 16
--------
15 14 13 12 11 10 9 8
--------
76543210
- - - - - SWTRG CLKDIS CLKEN