Manualshelf

Datasheet

ManualsBrandsMICROCHIP TECHNOLOGY ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller TQFP 48 (7x7) 32-Bit 48 MHz I/O number 35
461462463464465466467468469470
461
32133D–11/2011
UC3D
Write this bit to one if the command in CMDR performs a repeated start to the same slave address as addressed in the previous
transfer in order to enter master receiver mode.
Write this bit to zero otherwise.
• TENBIT: Ten Bit Addressing Mode
0: Use 7-bit addressing mode.
1: Use 10-bit addressing mode. Must not be used when the TWIM is in SMBus mode.
• SADR: Slave Address
Address of the slave involved in the transfer. Bits 9-7 are don’t care if 7-bit addressing is used.
• READ: Transfer Direction
0: Allow the master to transmit data.
1: Allow the master to receive data.