Datasheet

369
32133D–11/2011
UC3D
20.7.10 Receiver Time-out Register
Name:
RTOR
Access Type: Read-write
Offset: 0x24
Reset Value: 0x00000000
This register can only be written to if write protection is disabled, see ”Write Protect Mode Register” on page 371.
• TO: Time-out Value
0: The receiver Time-out is disabled.
1 - 65535: The receiver Time-out is enabled and the time-out delay is TO x bit period.
Note that the size of the TO counter is device dependent, see the Module Configuration section.
31 30 29 28 27 26 25 24
––––––––
23 22 21 20 19 18 17 16
––––––––
15 14 13 12 11 10 9 8
TO[15:8]
76543210
TO[7:0]