Datasheet

358
32133D–11/2011
UC3D
20.7.2 Mode Register
Name:
MR
Access Type: Read-write
Offset: 0x4
Reset Value: 0x00000000
This register can only be written if the WPEN bit is cleared in the Write Protect Mode Register.
• INACK: Inhibit Non Acknowledge
0: The NACK is generated.
1: The NACK is not generated.
• OVER: Oversampling Mode
0: Oversampling at 16 times the baud rate.
1: Oversampling at 8 times the baud rate.
• CLKO: Clock Output Select
0: The USART does not drive the CLK pin.
1: The USART drives the CLK pin unless USCLKS selects the external clock.
• MODE9: 9-bit Character Length
0: CHRL defines character length.
1: 9-bit character length.
• MSBF/CPOL: Bit Order or SPI Clock Polarity
If USART does not operate in SPI Mode:
MSBF=0: Least Significant Bit is sent/received first.
MSBF=1: Most Significant Bit is sent/received first.
If USART operates in SPI Mode, CPOL is used with CPHA to produce the required clock/data relationship between devices.
CPOL=0: The inactive state value of CLK is logic level zero.
CPOL=1: The inactive state value of CLK is logic level one.
31 30 29 28 27 26 25 24
––––– –
23 22 21 20 19 18 17 16
– – – INACK OVER CLKO MODE9 MSBF/CPOL
15 14 13 12 11 10 9 8
CHMODE NBSTOP PAR SYNC/CPHA
76543210
CHRL USCLKS MODE