Datasheet

276
32133D–11/2011
UC3D
18.7.16 Interrupt Flag Register
Name: IFR
Access: Read, Clear
Offset:0x0D0, 0x0D8
Reset Value: -
• P0-31: Interrupt Flag
0: No interrupt condition has been detected on the corresponding pin.
1: An interrupt condition has been detected on the corresponding pin.
The number of interrupt request lines depends on the number of GPIO pins on the MCU. Refer to the product specific data for
details. Note also that a bit in the Interrupt Flag register is only valid if the corresponding bit in IER is one.
31 30 29 28 27 26 25 24
P31 P30 P29 P28 P27 P26 P25 P24
23 22 21 20 19 18 17 16
P23 P22 P21 P20 P19 P18 P17 P16
15 14 13 12 11 10 9 8
P15 P14 P13 P12 P11 P10 P9 P8
76543210
P7 P6 P5 P4 P3 P2 P1 P0