Datasheet

8-bit AVR Microcontroller
ATtiny102/ATtiny104
DATASHEET PRELIMINARY SUMMARY
Introduction
The Atmel
®
ATtiny102/ATtiny104 is a low-power CMOS 8-bit microcontroller
based on the AVR
®
enhanced RISC architecture. By executing powerful
instructions in a single clock cycle, the ATtiny102/ATtiny104 achieves
throughputs close to 1 MIPS per MHz. This empowers system designer to
optimize the device for power consumption versus processing speed.
Feature
High Performance, Low Power Atmel
®
AVR
®
8-Bit Microcontroller Family
Advanced RISC Architecture
54 Powerful Instructions
Mostly Single Clock Cycle Execution
16 x 8 General Purpose Working Registers
Fully Static Operation
Up to 12 MIPS Throughput at 12MHz
Non-volatile Program and Data Memories
1024 Bytes of In-system Programmable Flash Program Memory
32 Bytes Internal SRAM
Flash Write/Erase Cycles: 10,000
Data Retention: 20 Years at 85°C / 100 Years at 25°C
Self-programming Flash on Full Operating Voltage Range (1.8 –
5.5V)
Peripheral Features
One 16-bit Timer/Counter (TC) with Prescaler, Input Capture,
Two Output Capture and Two PWM Channels
Programmable Watchdog Timer (WDT) with Separate On-chip
Oscillator
Selectable Internal Voltage References: 1.1V, 2.2V and 4.3V
10-bit ADC with 8-channels/14-pin and 5-channel/8-pin Package
Options
On-chip Analog Comparator (AC)
Serial Communication Module: Single USART
Atmel-42505A-8-bit AVR Microcontroller_Datasheet_Preliminary Summary-02/2016

Summary of content (14 pages)