User manual

2
AVR600
8170A-AVR-08/08
2 Routing cards
The routing cards sit between the generic socket card and the STK600. It has one
pair of electric pads underneath to mate with the STK600 spring loaded connector,
and one pair of pads on top where the socket card connector connects. A part
specific card with the target IC soldered on can be viewed as a routing card without
the top pads.
2.1 Connector footprints
A Routing card should have pads to mate with the following spring loaded connectors:
Table 2-1. Router card connectors
Manufacturer and MPN Quantity Comment
SAMTEC, FSI-140-03-G-D-AD 2 80 pins To socket card (top)
SAMTEC, FSI-150-03-G-D-AD 2 100 pins To STK600 (bottom)
Figure 2-1. PCB land pattern for mating to FSI connectors