Information

ATAVRISP2

The new AVRISP2 is low-cost In-System Programmer for all AVR microcontrol-

lers with ISP interface.

Features:

n Programs both Flash and EEPROM

n Supports fuses and lock bits programming

n Supports target voltages from 1.8V to 5.5V

n Adjustable programming speed

n USB 2.0 compliant (full speed, 12 Mbps)

n Powered from USB, does not require external power supply

n Target interface protection

n Short–circuit protection

ATSTK600

The Atmel ATSTK600 starter kit provides a complete programming and development

system. It will support all AVR and AVR32 with ﬂ ash memory (UC3 Family, ATtiny,

ATmega and Xmega AVRs)

Features

n Sockets for all devices:

10 versions of top and routing cards

USB interface to host PC

Supports all programming modes

Separate Target Voltage Circuit

Improved clock generator

Socket and adapter boards are available for the whole range of AVR’s, from

8- to 144-pins devices. In the standard conﬁ guration, the ATSTK600 is shipped

with a demonstration board using an ATmega2560. To add support for the

various devices, a package with the socket adapter card for the device to use

must also be purchased.

The following packages are available:

ATSTK600-DIP40 : adapter board for PDIP devices

ATSTK600-SOIC : adapter board for SOIC devices

ATSTK600-TQFP100 : adapter board for TQFP100 devices

ATSTK600-TQFP64 : adapter board for TQFP64 devices

ATSTK600-TQFP64-2 : adapter board for AT32UC3B in TQFP64

ATSTK600-TQFP44 : adapter board for TQFP44 devices

ATSTK600-TQFP32 : adapter board for TQF32 devices

ATSTK600-TINYX3U : adapter board for ATtinyX3U devices

ATSTK600-UC3-144 : adapter board for AT32UC3A0

ATSTK600-TINY10 : adapter board for ATtiny10,9,5,4

Starter Kits / Programmer