Datasheet

4
AVR061
2525B–AVR–04/03
Get Parameter Value Get the value of a valid parameter from the STK500 starterkit. If the parameter is not
used, the same parameter will be returned together with a Resp_STK_FAILED
response to indicate the error. See the parameters section for valid parameters and their
meaning.
Command Cmnd_STK_GET_PARAMETER, parameter, Sync_CRC_EOP
Command Value 0x41
Response Resp_STK_INSYNC, value, Resp_STK_OK
or
Resp_STK_INSYNC, parameter, Resp_STK_FAILED
or
Resp_STK_NOSYNC (If no Sync_CRC_EOP received)
Set Parameter Value Set the value of a valid parameter in the STK500 starterkit. See the parameters section
for valid parameters and their meaning.
Command Cmnd_STK_SET_PARAMETER, parameter, value, Sync_CRC_EOP
Command Value 0x40
Response Resp_STK_INSYNC, Resp_STK_OK
or
Resp_STK_INSYNC, parameter, Resp_STK_FAILED
or
Resp_STK_NOSYNC (If no Sync_CRC_EOP received)
Table 3. Parameters
Parameter Name Field Usage Field Format
parameter Any valid parameter as defined in “command.h” 1 byte (0x00 - 0x7F)
value Any 8-bit value 1 byte (0x00 - 0xFF)
Table 4. Parameters
Parameter Name Field Usage Field Format
parameter Any valid parameter as defined in COMMON.H 1 byte (0x00 - 0x7F)
value Any 8-bit value 1 byte (0x00 - 0xFF)