Datasheet

561
SAM4S Series [DATASHEET]
11100F–ATARM–29-Jan-14
Figure 31-12. Parallel Capture Mode Waveforms (DSIZE=2, ALWYS=0, HALFS=1, FRSTS=0)
Figure 31-13. Parallel Capture Mode Waveforms (DSIZE=2, ALWYS=0, HALFS=1, FRSTS=1)
31.5.13.3 Restrictions
 Configuration fields DSIZE, ALWYS, HALFS and FRSTS in PIO_PCMR can be changed ONLY if the parallel
capture mode is disabled at this time (PCEN = 0 in PIO_PCMR).
 Frequency of PIO Controller clock must be strictly superior to two times the frequency of the clock of the device
which generates the parallel data.
31.5.13.4 Programming Sequence
Without PDC
1. Write PIO_PCIDR and PIO_PCIER in order to configure the parallel capture mode interrupt mask.
2. Write PIO_PCMR to set the fields DSIZE, ALWYS, HALFS and FRSTS in order to configure the parallel capture
mode WITHOUT enabling the parallel capture mode.
3. Write PIO_PCMR to set the PCEN bit to one in order to enable the parallel capture mode WITHOUT changing the
previous configuration.
4. Wait for a data ready by polling the DRDY flag in PIO_PCISR or by waiting for the corresponding interrupt.
5. Check OVRE flag in PIO_PCISR.
0x23 0x34 0x450x12 0x56 0x67 0x78 0x89
0x6745_2301
PIODCCLK
PIODC[7:0]
PIODCEN1
PIODCEN2
DRDY (PIO_PCISR)
RDATA (PIO_PCRHR)
0x01
Read of PIO_PCISR
MCK
0x23 0x34 0x450x12 0x56 0x67 0x78 0x89
0x7856_3412
PIODCCLK
PIODC[7:0]
PIODCEN1
PIODCEN2
DRDY (PIO_PCISR)
RDATA (PIO_PCRHR)
0x01
Read of PIO_PCISR
MCK