Datasheet

367
SAM4S Series [DATASHEET]
11100F–ATARM–29-Jan-14
Figure 21-3. Parallel Programming Timming, Write Sequence
21.3.4.2 Read Handshaking
For details on the read handshaking sequence, refer to Figure 21-4 Figure 21-5 and Table 21-5.
Figure 21-4. Parallel Programming Timing, Read Sequence
NCMD
RDY
NOE
NVALID
DATA[15:0]
MODE[3:0]
1
2
3
4
5
Table 21-4. Write Handshake
Step Programmer Action Device Action Data I/O
1 Sets MODE and DATA signals Waits for NCMD low Input
2 Clears NCMD signal Latches MODE and DATA Input
3 Waits for RDY low Clears RDY signal Input
4 Releases MODE and DATA signals Executes command and polls NCMD high Input
5 Sets NCMD signal Executes command and polls NCMD high Input
6 Waits for RDY high Sets RDY Input
NCMD
RDY
NOE
NVALID
DATA[15:0]
MODE[3:0]
1
2
3
4
5
6
7
9
8
ADDR
Adress IN Z
Data OUT
10
11
XIN
12
13