Datasheet

983
SAM4S Series [DATASHEET]
11100F–ATARM–29-Jan-14
39.7.39 PWM Channel Period Register
Name: PWM_CPRDx [x=0..3]
Address: 0x4002020C [0], 0x4002022C [1], 0x4002024C [2], 0x4002026C [3]
Access: Read/Write
This register can only be written if bits WPSWS3 and WPHWS3 are cleared in the “PWM Write Protection Status Register” .
Only the first 16 bits (channel counter size) are significant.
• CPRD: Channel Period
If the waveform is left-aligned, then the output waveform period depends on the channel counter source clock and can be
calculated:
– By using the PWM master clock (MCK) divided by an X given prescaler value (with X being 1, 2, 4, 8, 16, 32,
64, 128, 256, 512, or 1024). The resulting period formula will be:
– By using the PWM master clock (MCK) divided by one of both DIVA or DIVB divider, the formula becomes,
respectively:
or
If the waveform is center-aligned, then the output waveform period depends on the channel counter source clock and can be
calculated:
– By using the PWM master clock (MCK) divided by an X given prescaler value (with X being 1, 2, 4, 8, 16, 32,
64, 128, 256, 512, or 1024). The resulting period formula will be:
– By using the PWM master clock (MCK) divided by one of both DIVA or DIVB divider, the formula becomes,
respectively:
or
31 30 29 28 27 26 25 24
––––––––
23 22 21 20 19 18 17 16
CPRD
15 14 13 12 11 10 9 8
CPRD
76543210
CPRD
XCPRD×()
MCK
-------------------------------
CRPD DIVA×()
MCK
------------------------------------------
CRPD DIVB×()
MCK
------------------------------------------
2 XCPRD××()
MCK
----------------------------------------
2 CPRD DIVA××()
MCK
---------------------------------------------------
2 CPRD× DIVB×()
MCK
---------------------------------------------------