Datasheet

907
SAM4S Series [DATASHEET]
11100F–ATARM–29-Jan-14
38.14.14HSMCI Interrupt Disable Register
Name: HSMCI_IDR
Address: 0x40000048
Access: Write-only
The following configuration values are valid for all listed bit names of this register:
0: No effect.
1: Disables the corresponding interrupt.
• CMDRDY: Command Ready Interrupt Disable
• RXRDY: Receiver Ready Interrupt Disable
• TXRDY: Transmit Ready Interrupt Disable
• BLKE: Data Block Ended Interrupt Disable
• DTIP: Data Transfer in Progress Interrupt Disable
• NOTBUSY: Data Not Busy Interrupt Disable
• ENDRX: End of Receive Buffer Interrupt Disable
• ENDTX: End of Transmit Buffer Interrupt Disable
• SDIOIRQA: SDIO Interrupt for Slot A Interrupt Disable
• SDIOWAIT: SDIO Read Wait Operation Status Interrupt Disable
• CSRCV: Completion Signal received interrupt Disable
• RXBUFF: Receive Buffer Full Interrupt Disable
• TXBUFE: Transmit Buffer Empty Interrupt Disable
• RINDE: Response Index Error Interrupt Disable
• RDIRE: Response Direction Error Interrupt Disable
• RCRCE: Response CRC Error Interrupt Disable
• RENDE: Response End Bit Error Interrupt Disable
31 30 29 28 27 26 25 24
UNRE OVRE ACKRCVE ACKRCV XFRDONE FIFOEMPTY – –
23 22 21 20 19 18 17 16
CSTOE DTOE DCRCE RTOE RENDE RCRCE RDIRE RINDE
15 14 13 12 11 10 9 8
TXBUFE RXBUFF CSRCV SDIOWAIT – – – SDIOIRQA
76543210
ENDTX ENDRX NOTBUSY DTIP BLKE TXRDY RXRDY CMDRDY