Datasheet

905
SAM4S Series [DATASHEET]
11100F–ATARM–29-Jan-14
38.14.13HSMCI Interrupt Enable Register
Name: HSMCI_IER
Address: 0x40000044
Access: Write-only
The following configuration values are valid for all listed bit names of this register:
0: No effect.
1: Enables the corresponding interrupt.
• CMDRDY: Command Ready Interrupt Enable
• RXRDY: Receiver Ready Interrupt Enable
• TXRDY: Transmit Ready Interrupt Enable
• BLKE: Data Block Ended Interrupt Enable
• DTIP: Data Transfer in Progress Interrupt Enable
• NOTBUSY: Data Not Busy Interrupt Enable
• ENDRX: End of Receive Buffer Interrupt Enable
• ENDTX: End of Transmit Buffer Interrupt Enable
• SDIOIRQA: SDIO Interrupt for Slot A Interrupt Enable
• SDIOWAIT: SDIO Read Wait Operation Status Interrupt Enable
• CSRCV: Completion Signal Received Interrupt Enable
• RXBUFF: Receive Buffer Full Interrupt Enable
• TXBUFE: Transmit Buffer Empty Interrupt Enable
• RINDE: Response Index Error Interrupt Enable
• RDIRE: Response Direction Error Interrupt Enable
• RCRCE: Response CRC Error Interrupt Enable
• RENDE: Response End Bit Error Interrupt Enable
31 30 29 28 27 26 25 24
UNRE OVRE ACKRCVE ACKRCV XFRDONE FIFOEMPTY – –
23 22 21 20 19 18 17 16
CSTOE DTOE DCRCE RTOE RENDE RCRCE RDIRE RINDE
15 14 13 12 11 10 9 8
TXBUFE RXBUFF CSRCV SDIOWAIT – – – SDIOIRQA
76543210
ENDTX ENDRX NOTBUSY DTIP BLKE TXRDY RXRDY CMDRDY