Datasheet

541
SAM4S Series [DATASHEET]
11100F–ATARM–29-Jan-14
29.17.26PMC Oscillator Calibration Register
Name: PMC_OCR
Address: 0x400E0510
Access: Read/Write
This register can only be written if the WPEN bit is cleared in “PMC Write Protection Mode Register” .
• CAL4: RC Oscillator Calibration bits for 4 MHz
Calibration bits applied to the RC Oscillator when SEL4 is set.
• SEL4: Selection of RC Oscillator Calibration bits for 4 MHz
0: Default value stored in Flash memory.
1: Value written by user in CAL4 field of this register.
• CAL8: RC Oscillator Calibration bits for 8 MHz
Calibration bits applied to the RC Oscillator when SEL8 is set.
• SEL8: Selection of RC Oscillator Calibration bits for 8 MHz
0: Factory determined value stored in Flash memory.
1: Value written by user in CAL8 field of this register.
• CAL12: RC Oscillator Calibration bits for 12 MHz
Calibration bits applied to the RC Oscillator when SEL12 is set.
• SEL12: Selection of RC Oscillator Calibration bits for 12 MHz
0: Factory determined value stored in Flash memory.
1: Value written by user in CAL12 field of this register.
31 30 29 28 27 26 25 24
––––––––
23 22 21 20 19 18 17 16
SEL12 CAL12
15 14 13 12 11 10 9 8
SEL8 CAL8
76543210
SEL4 CAL4