User manual

SAM4S-WPIR-RD [USER GUIDE]

42060A–ATARM–12/2012

Section 3

Power Up

3.1 Power Up the Board

Unpack the board taking care to avoid electrostatic discharge. Connect the board to PC with the USB cable, or

insert 3 x AAA Alkaline cells on U4 Battery Holder, and then the board should be powered on.

Note: Jumpers JP1, JP4, JP7, JP8, JP9, JP10 must be closed and JP2, JP3 must be open for start-up.

3.2 Sample Code and Technical Support

Users can download sample code and get technical support from the Atmel web site:

http://www.atmel.com/products/microcontrollers/arm/sam4s.aspx?tab=tools

Figure 3-1. Atmel Web Site for SAM4S Products