Datasheet

SAM4S Series [DATASHEET]
Atmel-11100G-ATARM-SAM4S-Datasheet_27-May-14
1122
44. Electrical Characteristics
44.1 Absolute Maximum Ratings
44.2 Recommended Opeating Conditions
Table 44-1. Absolute Maximum Ratings*
Storage Temperature. . . . . . . . . . . . . . . . . .-60°C to + 150°C
*NOTICE: Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation of the
device at these or other conditions beyond those indi-
cated in the operational sections of this specification is
not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
Solder Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Voltage on Input Pins
with Respect to Ground. . . . . . . . . . -0.3V to + VDDIO+0.4V
Maximum Operating Voltage
(VDDCORE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.32V
Maximum Operating Voltage
(VDDIO). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.0V
Total DC Output Current on all I/O lines
100-lead LQFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mA
100-ball TFBGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mA
100-ball VFBGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mA
64-lead LQFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
64-lead QFN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
64-lead WLCSP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
Table 44-2. Recommended Operating Conditions
Symbol Parameter Conditions Min Typ Max Unit
T
A
Ambient Temperature Range -40 – +105 °C
VDDCORE DC Supply Core 1.08 1.20 1.32 V
VDDIO DC Supply I/Os 1.62 3.3 3.6 V
V
VDDPLL
PLL A, PLLB and Main Oscillator
Supply
1.08 – 1.32 V
Supply Ripple Voltage (on VDDIO ) Rms value, 10 kHz to 10 MHz – – 30 mV
Supply Ripple Voltage (on VDDPLL)
Rms value, 10 kHz to 10 MHz
Rms value > 10 MHz
––
20
10
mV
Supply Ripple Voltage (on VDDIN) Rms value, 10 kHz to 20 MHz – – 20 mV
f
MCK
Master Clock Frequency
VDDCORE @ 1.20V
VDDCORE @ 1.08V
––
120
100
MHz