Datasheet

299
SAM4S [DATASHEET]
11100E–ATARM–24-Jul-13
18.5.4 Supply Controller Supply Monitor Mode Register
Name: SUPC_SMMR
Address: 0x400E1414
Access: Read-write
• SMTH: Supply Monitor Threshold
Allows to select the threshold voltage of the supply monitor. Refer to electrical characteristics for voltage values.
• SMSMPL: Supply Monitor Sampling Period
• SMRSTEN: Supply Monitor Reset Enable
0 (NOT_ENABLE) = the core reset signal “vddcore_nreset” is not affected when a supply monitor detection occurs.
1 (ENABLE) = the core reset signal, vddcore_nreset is asserted when a supply monitor detection occurs.
• SMIEN: Supply Monitor Interrupt Enable
0 (NOT_ENABLE) = the SUPC interrupt signal is not affected when a supply monitor detection occurs.
1 (ENABLE) = the SUPC interrupt signal is asserted when a supply monitor detection occurs.
31 30 29 28 27 26 25 24
––––––––
23 22 21 20 19 18 17 16
––––––––
15 14 13 12 11 10 9 8
– – SMIEN SMRSTEN – SMSMPL
76543210
– – – – SMTH
Value Name Description
0x0 SMD Supply Monitor disabled
0x1 CSM Continuous Supply Monitor
0x2 32SLCK Supply Monitor enabled one SLCK period every 32 SLCK periods
0x3 256SLCK Supply Monitor enabled one SLCK period every 256 SLCK periods
0x4 2048SLCK Supply Monitor enabled one SLCK period every 2,048 SLCK periods