Datasheet

1047
SAM4S [DATASHEET]
11100E–ATARM–24-Jul-13
43.3.2 Sleep and Wait Mode Current Consumption
The wait mode and sleep mode configuration and measurements are defined below.
Figure 43-5. Measurement Setup for Sleep Mode
43.3.2.1 Sleep Mode
 Core clock off
 VDDIO=VDDIN=3.3V
 Master clock (MCK) running at various frequencies with PLLA or the fast RC oscillator
 Fast start-up through WKUP0–15 pins
 Current measurement as shown in Figure 43-5
 All peripheral clocks deactivated
 Temperature = 25°C
Table 43-10 shows the current consumption in typical conditions.
Table 43-9. Power Consumption for Backup Mode (SAM4SD32/SD16/SA16 rev A)
Backup
Total Consumption
Typical value
@25°C
Maximum Value
@85°C
Maximum Value
@105°C Unit
Conditions
(AMP1)
Configuration A
(AMP1)
Configuration B
(AMP1)
Configuration A
(AMP1)
Configuration A Unit
VDDIO = 3.6V
VDDIO = 3.3V
VDDIO = 3.0V
VDDIO = 2.5V
VDDIO = 1.8V
2.1
1.8
1.7
1.3
0.9
2.0
1.8
1.6
1.3
0.9
15.2
14.6
13.4
11.8
10.8
25.9
NA
NA
NA
NA
µA
VDDIO
VDDOUT
VDDCORE
VDDIN
Voltage
Regulator
VDDPLL
3.3V
AMP1
AMP2